Product Categories

Alpine - 200W Class A/B Bridgeable 4/3/2-Channel
MOSFET Amplifier w/ Adjustable Crossover MRP-F300

 
 


  • You are here:

Alpine - 200W Class A/B Bridgeable 4/3/2-Channel
MOSFET Amplifier w/ Adjustable Crossover
MRP-F300

Category

Hit the road while listening to your favorite jams on your car stereo with this sleek MOSFET 4/3/2-channel amplifier that features continuously adjustable gain control and EQ controls for expressive sound you can rock to.

Product Features
Alpine products do not ship to Puerto Rico
200W peak power (50W x 4) @ 4 ohms, 14.4V, 20Hz - 20kHz, 1% THD
150W x 2 RMS (continuous) power @ 4 ohms, bridged
50W RMS (continuous) power x 4 @ 4 ohms, 14.4V, 20Hz - 20kHz, 1% THD
75W RMS (continuous) power x 4 @ 4 ohms, 14.4V, 20Hz - 20kHz
MOSFET power supply delivers clean power with minimal heat dispersion; rugged heat sinks and thermal management processor regulate amp temperature to help prevent overheating; overcurrent protection
Adjustable high-pass/low-pass crossover
EQ and bass EQ controls for customizable audio; continuously adjustable gain control
Discrete preamp stage
Gold-plated RCA inputs; speaker level inputs; nonfading preamp output
Top-mounted blue LED power/status indicator
STAR circuitry
Impedance: 2 or 4 ohms
Signal-to-noise ratio: 100dBA
Product images, including color, may differ from actual product appearance.

  • Nintendo - Nintendo

    $141.09

     
  • Nintendo - Nintendo

    $124.49

     
  • Sony - PSPgo

    $207.49

     
  • PlayStation 3 -

    $248.99

     
  • Microsoft - Xbox

    $132.79

     
  • Apple® - iPad™

    $437.00

     

How do I hook up two 4ohm and two 2ohm speakers to Alpine MRP-F300 amp?

I need help, in layman's terms (not very smart when it comes to this stuff). I believe for the two 4ohm speakers I just use channels 1 and 2 and hook the positive of each speaker to the positives of each change and the same for the negatives. My delima is with the two 2ohm Kappas. I don't want...

read more

Is an MRP-F300 amp enough to power 4 speakers and a sub?

My current setup is: Alpine CDA-105 Head unit Two Alpine SPS-600's in front One Alpine MRP-F300 amp powering the two front speakers Now, I'm going to get two more speakers put in the back of my car (I think two more sps-600's), and I will have the same amp powering all 4 speakers. The guy at the...

read more

Alpine MRP F300 Amp Question?

Do you think this is a good amp for running front and rear Alpine speakers with for the money? Any experiences with this amp would be helpful. thanks.

read more

Would the Alpine MRP-F300 work?

I want to hook up a 12in Alpine Type E sub into my car but I want a good amp. I was told because of the type of sub, that I should go with a 2-channel amp. I would prefer to stick to Alpine amps and I wondered if the F300 would work out? I also want a good but inexpensive amp. I run a Pioneer 110...

read more

What gauge wire should i use to connect amp?

I am going to instal an Alpine MRP-F300 amplifier. Peak Power of 200W to 4 speakers 50W RMS (continuous) power x 4 @ 4 ohms. I was unsure of what wire gauge to use.

read more

How much will my sound improve?

Going from a 04 Elantra factory install, to: Infinity Kappas in front (75 rms each) Infinity Kappas in back (120 rms each) Sony XPlod head unit Alpine MRP-F300 amp (75X4 rms at 2 ohms, which is what these speakers use) Rate, from 0-100, the quality of my Hyundai factory install. And, also from 0...

read more

Where would you set the amp crossovers?

Alpine MRP-F300 4 channel amp hooked up to 2 ea Alpine S Series 6 !/2 speakers and 2 ea S series 5 1/4 speakers. Blaupunkt head unit and Infinity Basslink. Also have Audiobahn tweeters ran to head unit. Should I use the high-pass filters or keep the amp on full range mode? Where would the crosso...

read more

how do you know how to match up the right sub with the right amp?

would 2 Kicker CompVR 07CVR122 subs work with an Alpine MRP-F300 amp? the kicker has 50-400 watts and the amp has 150 watts. im really new to car audio so im taking any advice.

read more

Can I use 4 Gauge for an 8 Gauge Amp?

Well I orderd a Alpine MRP-F300. The reccomended Power Wire is 8 Gauge but, I was wondering if I could use 4 Gauge? Also do I need to run 1 or 2 remote turn on wires for this 4 channel amp?

read more

Are high level inputs the same as speaker level inputs?

Also, does the Alpine MRP-F300 amp have 300 watts RMS?

read more

I am a newbie when it comes to car audio systems.?

I am a newbie when it comes to car audio systems. I recently installed a 12" Rockford Fosgate, a mono Alpine MRP m500 into the my pre existing 4 channel alpine : MRP-F300, alpine 9853 deck. I was curious as to what I should set the amp settings to. If it helps as far as what type of music I liste...

read more

what amp shud i power 4 alpiine type r speakers with?

i have 4 alpine type r speakers and each can handle 100 watts rms .. shud i use a kicker sx700.4 , an alpine mrp-f300, alpine mrp-f450, alpine mrp-f550 or alpine mrp-f600.. please help

read more

Need Help choosing an Amplifier?

Hi all, I have a Alpine CDE-9882 Head unit, SPS-10C2 Alpine speakers and Pioneer Tsa-6992 6X9's and am looking for a suitable amplifier. I was wondering wether a Alpine MRP-F250 or MRP-F300 would work well and how would i go about setting it up. I dont need exellent sound or anything just a bit ...

read more

Will my speakers handle my amp ?

i have an alpine mrp-f300 amp at 50 x 4 RMS i was wondering if my two pioneer 30 RMS speakers and my two MTX 60 RMS could handle this or would they blow, im new at this i was just wondering if someone could recommend some speaker ratings for me.

read more

Im running four Alpine Type-R SPR-17C - Car speaker 100 Watt speakers with a 50 watt deck in my car?

What type of amp would i need would this work Alpine MRP-F300

read more

getting more capacitorsreally help my light dimming problem?

i got one capacitor giving power to my 2 amps but my lights still deem. or what is another solution. http://www.sonicelectronix.com/item_12020_Alpine+MRP-F300.html http://www.sonicelectronix.com/item_11795_Kenwood+KAC-9104D.html http://www.sonicelectronix.com/item_14305_XO+Vision+Express+CA15...

read more

Which Would Be Better For My System?

I have two 6.5 Alpine Type-S, two 6x9 Alpine Type-S, and a 10" Alpine Type-S Shallow Mount Sub. Which Amp should I choose the Alpine MRP-F600 or the MRP-F300?

read more

what gauge amp wire kit should i get?

how do you get the front door speakers on the amp too??? i got this amp http://www.alpine-usa.com/US-en/products/product.php?model=MRP-F300 thanksss

read more

line level or preamp out?

I have an Alpine CDE 9874 head ( 4-chan. w/no sub preamp out). I'm going to add an Alpine MRP F300 4 chan. amp for door spkrs and mono amp for sub. Can I link mono amp w/line out on MRP or do I need a new head w/preamp sub out?

read more

Help me pick a capacitor.?

This is my car audio system, tell me what kind of capacitor (what specs) i need. Thanks. -2 10" rockford fosgate subs powered by a 600watt amp. -6x9 infiniti kappa speakers, and 6.5" Infiniti kappa speakers powered by a Alpine MRP-F300 amp. (50 watts RMS x 4 at 4 ohms ) What does my system req...

read more

best answer
  • Kicker - ZX

    $359.99

     
  • Power Acoustik -

    $224.99

     
  • Alpine - 200W

    $123.50

     
  • Kicker - ZX

    $449.99

     
  • Infinity - 894W

    $269.99

     
  • Kicker - ZX

    $314.99

     
 


Find, Compare, Read Reviews & Buy Find, Compare, Read Reviews & Buy Alpine - 200W Class A/B Bridgeable 4/3/2-Channel
MOSFET Amplifier w/ Adjustable Crossover - MRP-F300 Online At Uncle Chuck's Audio and Video Superstore!