MTX - 400W Class D Bridgeable 1-Channel Amplifier
with Low-Pass Crossovers TN250/1

• You are here:

• Category:
• Audio
• Car Amplifiers

Best Selling Products

• 

  Microsoft - Xbox

  $132.79

   
• 

  Sony - PlayStation

  $300.99

   
• 

  Nintendo - Nintendo

  $151.99

   

• 

  Apple® - iPad™

  $394.25

   
• 

  Apple® - iPad™

  $475.00

   
• 

  Apple® - iPad™

  $332.50

   

Reviews of MTX - 400W Class D Bridgeable 1-Channel Amplifier
with Low-Pass Crossovers - TN250/1

What kind of amplifier should I use to power 2 MTX TR4512 subwoofers? Can I use an MTX TN250/1?

or is there a better MTX amp that I can use?

how will 2 MTX Audio Terminator TNP212D subwoofers and a mtx TN250/1 Monoblock Amplifier sound?

Can you use a bass knob on MTX Audio Terminator TN250/1 Mono Amp?

I got my MTX Terminator system put in my 2006 Ford Fusion and i love it but the bass is all the way down in my car but it is still really loud on every thing even the radio commercials so i want a bass knob to control that but im not sure if i can hook one up to the amp. so if any one knows can y...

I already have a mtx terminator TN250/1 amplifier would that be able to power 2 10" kicker cvr's?

if so, should i purchase the CompVR CVR104 Dual 4 ohms or the 10" CompVR CVR102 Dual 2 ohms? In my first car i used this amp with 2 12" mtx terminators (if that helps you give me an answer) but the whole 2 ohm and 4 ohm thing really throws me off so if you could help me out that would be great! i...

Should I buy 1 or 2 Subwoofers for my SUV?

I have a 2001 Toyota Sequoia and I am debating whether I should get 1 or 2 subs for my suv. If I have 1 sub will it not be enough? Will 2 be too much? This is the set I am looking at now but I am thinking maybe I don't need that much and I can go down to 1 sub. http://www.techronics.com/caraudio...

I have a Rockford p3 500 rms, what is a good size amp to push this sub??r=1267754424?

Ive currently got a sony xplod 1000 peak amp... i kno i kno sonys no good but my buddy blew my other amp. this one just doesnt sound right. a friend is selling a mtx terminator tn250/1 for $50 would this sound better than my current setup or should i wait till i save up?

a car stereo question?

will these things work together TN250/1 E12ST P1S412

MTX Terminator.?Good Subs?

MTX created the Terminator series amplified sub system with one thing in mind: to terminate the competition who make inferior quality loaded woofer systems. They did a great job with this system as they thoroughly tested their TN250/1 Class D monoblock amplifier with the two Terminator 12" subwoo...

Best, Cheap Amplifier that will maximize the power of my system?

I am going to purchase an MTX TNP212D Dual 12" Loaded Sub..it comes with a TN250/1 Amp from MTX..I no nothing more than the basics about car audio systems, the reviews I read recommend that I get a different amp than the one that comes with the combo package..I am looking to spend no more than 1...

Sub/Amp/Capacitor questions?

I drive a 2003 Nissan Altima with a Bose sound system and I am looking for more beat. I came across a package of 2 MTX 12" Subs, MTX Terminator TN250/1 Amp, and an MTX box. Would I need a capacitor for this setup? Also, can anyone give me reviews on these subs/amp? I'm not an audio junkie or anyt...

Did I blow up my amp?

Ok well, I installed my amp yesterday, and within 90 minutes it shut off. Everything is correctly installed, however, the fuse it came with yesterday was blown, which was the reason I thought it shut off. Now I replaced the fuses and it says it has power, but I can't get any sound to my speaker...

Are these subs good? Amp Included?

Peak Power Handling: 1200 Watts (600 Watts per Subwoofer) # Oversized 40 oz. Double Stacked Strontium Magnet # Frequency Response: 24 Hz - 1 kHz # Efficiency: 87 dB # Box Content: * 2) MTX Subwoofers * MTX Subwoofer Box * MTX Terminator TN250/1 Amp Are those good specs for subs? If ...

Help with car audio!?

Is a 200w MTX Terminator TN250/1 Amp enough to power 2 600w MTx 12' subwoofers?

How can i make my MTX Subs Hit Harder?

Hello, i have just bought some subs here is info: MTX Audio TNP212D Terminator Combo Package 1200 Watt Peak Power Handling Single 2-ohm voice coil Includes TN250/1 Mono Block Amplifier and Two 12" Terminator Subwoofers in a Sealed Enclosure http://www.al-eds.com/MTX-TNP212D-p18603.html Anyw...

Are these car audio systems worth it?

I can choose between 2 12" MTX subs with an amp and a box IT IS 274 # Peak Power Handling: 1200 Watts (600 Watts per Subwoofer) # Oversized 40 oz. Double Stacked Strontium Magnet # Frequency Response: 24 Hz - 1 kHz # Efficiency: 87 dB # Box Content: * 2) MTX Subwoofers * MTX Subwoofer Bo...

How do i wire my subs?

I have two MTX Jackhammer JH55 12" subs at 400W RMS at 4 ohms and one MTX Jackhammer JH600 class D Mono block amplifier. How should i wire these for optimal performance and what would the output be? i would wire them to run at 2 ohms but i do not know how to do that

Can my amp power these subs?

I am looking into the MTX TCE510X2D combo. 2 10" subs running at 2ohms parallel with a 600W RMS. I currently have a Pioneer 800W Class D Mono Amplifier (GM-D7400M). The RMS on it is only 400W but I know of people running those subs on a lesser amp than I am. Can I run them? Thanks guys

Can i connect a MTX Audio JackHammer JH202 400W Max, 2-Channel Jack Hammer Amplifier?

with two MTX JackHammer JH4510-04 10" 4-ohm subwoofer? If not tell me a amplifier that i can connect the two subs with have it be mtx thanks

MTX 400w sub, what amp?

I have a 400w peak 200w RMS 10" single subwoofer. Is this a good one? http://www.bestbuy.com/site/olspage.jsp?id=1134701297803&type=product&skuId=7652444 This means I need 200w of power on a single channel to my sub right? What is the max power I could put into this sub you think without reachi...

whats a good amp for two 2 MTX Jack Hammer Subwoofers jh55 4 ohms 400w per sub?

whats a good amp for two 2 MTX Jack Hammer Subwoofers jh55 4 ohms 400w per sub

What amp for 2 400W 12" MTX RT12s?

I was wondering what amp I would use to power 2 MTX 12" subs? They are 200 RMS power, 400 W peak, and have 4 ohm impedance rating. I am confused about the channel and ohm ratings, so please clarify. Thanks

Which subs should i buy? Or and which is better? Kicker 12" Comp Subwoofer or MTX Thunder 12" 400W Subwoofer?

im buying 2 of them and haing them professionaly installed in all well i failed to mention that the mtx subs are 4500! well i failed to mention that the mtx subs are the 4500 subs

have a used 500w rms amplifier going to power my 12" 1200watt Mtx subwoofer, will this be good?

The sub is 400w rms peaks at 1200watts.

What kind of amp should I get for 2 12" 4500 MTX subs?

Just bought them online nice and in a ported box. The previous owner was not sure their full power but said that 400w's bridged sounded like its minimum, that it didnt even break them in. Okay i figured out that each sub is 250w rms so that 500 alltogether, but cant they handle more than 500, h...

What is the ampage fuse I need in a power cord to power a 400w RMS bridged amp?

Brand = MTX RT2400

MTX terminator or Memphis pr?

I am considering either an MTX terminator setup, with 2 12" subs in sealed box and 400w max amp, or a Memphis setup with 1 12" pr sub in Memphis ported box and 250w rms amp. Which would have overall better quality and sound?

What is the best MTX amp for a MTX MXS1004 Sub?

I currently have a SVC MXS1004 MTX 10" sub, it maxes at 400w RMS @ 4OHMS. I have run a tc3001 to it and it overheated the amp I have run a tc4001 to it and it also overheated it I have run a tc6001 to it and the amp was ok, however that amp is now blown for whatever reason I currently am runni...

My subwoofer hits every time I turn my blinkers or anything else on. WHY?

I have one 10" MTX sub powered by a 400w planet audio amp. What would be the reason the sub hits when I turn my headlights or anything else on?

What will be the power sent to the speakers?

i got 2 mtx 200w RMS 4 ohm subs and i got a pioneer 400W rms mono amp 2 ohm,i connected in parallel the subs so i got 2 ohm and i wanna hook it up to the amp my question is the amp will send 400w to each of the subs or 200W to each?

Why don't my MTX Audio Thunder 4000 12" subwoofers work?

I'm running a KAC - 7203 Kenwood 1000 W Max Output amplifier to 2 - MTX Thunder 4000 T4124 12" subs. The amp can put out 170 W x 2 at 4 ohms, 250 x 2 at 2 ohms, and 500 x 1 at 4 ohms. The subs have a RMS handling power of 200W and a total power handle of 400W. Yet when i plug the subs in, they...

Which two subwoofers could i hook up to an MTX Thunder 801d mono amp?

The MTX Thunder 801d puts out 1x400W@4 ohms, at i beleive 14.4V(ish) (not 12.5), it is wired in parallel on the inside and has two speaker outputs. I don't know what power speakers to hook up to the outputs because the 400W is before turning it into parallel. I want 12" speakers. heres a websit...

How to set subwoofer amp level?

Ok i have a DMM (digital mulimeter) but how do i use it and how does it help with the amp on my subwoofers? 400w Linear MONO Amp (2) 12" MTX Thunder Subwoofers in a ported box (400w to produce max power)

what should i do with my car stereo system?

right now i have a panasonic mp3 deck,a mtx 400x1wat amp, 2 volfenhag 12" 1000w each(max)dual voicecoil,2 power acoustik 6x9 400w(max) 2 eclipse 4" 100w (max) and 2 power acoustik tweeters 200w(max),i have a vented box, and i have my trunk filled with dynamat. Im using a 2 gauge wiring kit, and u...

How do i wire my subs?

I have two MTX Jackhammer JH55 12" subs at 400W RMS at 4 ohms and one MTX Jackhammer JH600 class D Mono block amplifier. How should i wire these for optimal performance and what would the output be? i would wire them to run at 2 ohms but i do not know how to do that

Where should i set the knobs on my mono amp settings?

Linear 400W MONO amp Level - MIN to MAX LPF - 40Hz - 250Hz subs are (2) 12" MTX subwoofers in a ported box what should my level and LPF settings be at? ok what do i do with the DMM my dads got one

My 600w Kenwood Amp burned out 3 Subs now!?

Nah j/p... but i was wondering, since some people said that i push my subs too hard, and this third sub (another "Lightning Sistems" rated at 750W/peak) will go down without a fight. I need somthing that can handle the load!? I was thinking getting a box of two MTX 400W? any suggestions? Well wha...

I have a sony stereo receiver that has stopped working, maybe overheated?

It was used for a party's sound system and died within 5 hours. Bought in 2004 for $150 (think 120watts) and it was powering 2 MTX (400w peak each) towers and 2 other smaller speakers. It was being played very loud for a long period, but I didn't expect it to stop working all together. Also it di...

Related Products

• 

  Pioneer - 800W

  $151.99

   
• 

  Power Acoustik -

  $179.99

   
• 

  Power Acoustik -

  $143.99

   
• 

  Kicker - ZX

  $809.99

   
• 

  Kenwood - 720W

  $106.35

   
• 

  Kicker - ZX

  $179.99